Problem setting up after a system restore

Forum to share information about Phone Amego and get help to answer your questions

Problem setting up after a system restore

Postby SaintFu » Thu Jul 21, 2016 6:09 pm

Last week I had to restore my HD from a backup, and a bunch of things got reset. PA worked just fine before the restore, but for some reason I can’t seem to get it working now. Everything seems to be set up properly, but for some reason it just doesn’t do anything when the phone rings or when I dial out. I’ve attached screenshots in case someone can spot something obvious that I’ve missed.

Thanks.

Screenshot 1.png
Screenshot 1.png (42.95 KiB) Viewed 961 times

Screenshot 2.png
Screenshot 2.png (124.7 KiB) Viewed 961 times

Screen Shot 2016-07-21 at 3.48.18 PM.png
Screen Shot 2016-07-21 at 3.48.18 PM.png (16.11 KiB) Viewed 961 times
SaintFu
 
Posts: 2
Joined: Thu Jul 21, 2016 5:50 pm

Re: Problem setting up after a system restore

Postby SaintFu » Sat Jul 23, 2016 12:38 pm

For what it’s worth, here’s the debug log from startup, including picking up the phone, dialing a number, having it answer and then hanging up:


2016-07-23 10:29:07 Phone Amego Pro version 1.4.37
2016-07-23 10:29:07 [Start monitoring]
[Bluetooth HandsFree publish service succeeded]
[Bluetooth MAP MNS publish service succeeded]
[Bluetooth PBAP PCE publish service succeeded]
2016-07-23 10:29:07 [startAllModems]
2016-07-23 10:29:07 XmlListener did start.
[GrandstreamListener start]
[Start monitoring VoIP Device: OBi100]
2016-07-23 10:29:07 [Monitoring on]
2016-07-23 10:29:08 Load Card Dictionary begin.
Load Card Dictionary processed: 0 read 0
[Created CallInfo for OBi100 Line 1]
[Created CallInfo for OBi100 1]
2016-07-23 10:30:58 [Call script off_hook (OBi100 1)]
--> <7> [SLIC]:Slic#0 OFF HOOK

2016-07-23 10:30:58 [Received notification (OBi100), polling delayed]
[Created CallInfo for OBi100/SP1]
[CS Active Out (OBi100/SP1)]
2016-07-23 10:31:13 [Call script off_hook (OBi100/SP1)]
2016-07-23 10:31:13 [Call script call_answer (OBi100/SP1)]
Load Card Dictionary processed: 0 read 0
2016-07-23 10:31:14 Load Card Dictionary completed.
[Created CallInfo for OBi100 2]
--> <7> [SLIC]:Slic#0 ONHOOK

[CS Released (OBi100/SP1)]
[Call End: 2016-07-23 10:31:20 -0600 (OBi100/SP1)]
2016-07-23 10:31:20 [Call script on_hook (OBi100/SP1)]
2016-07-23 10:31:20 [Call script call_end (OBi100/SP1)]
--> <7> [SLIC]:Slic#0 OFF HOOK

--> <7> [SLIC]:Slic#0 ONHOOK
SaintFu
 
Posts: 2
Joined: Thu Jul 21, 2016 5:50 pm

Re: Problem setting up after a system restore

Postby psichel_adm » Fri Jul 29, 2016 9:12 am

Make sure your Mac is still at the same IP address as before since you have configured your OBi to notify it there.

The Debug Logs shows you are getting on/off hook notifications from your OBi, but no call indications appear.

Kind Regards,

- Peter
psichel_adm
Site Admin
 
Posts: 463
Joined: Mon May 03, 2010 7:49 pm


Return to Phone Amego

Who is online

Users browsing this forum: No registered users and 1 guest

cron